The importance of pavement maintenance cannot be overstated. Asphalt crack sealing and filling is one such maintenance procedure that can keep your roads in good condition for years to come. The process involves the application of a sealant or filler material into cracks, defects, and other surface distresses to reduce water penetration and subsequent deterioration of the pavement structure.
While seal coating and crack filling help extend your pavement’s lifespan, a sub-standard crack filling job can hurt the surface in the long run as it ends up requiring frequent repairs and maintenance.
This blog post lists the best practices for crack filling and seal coating that create a distinct identity for freshly paved surfaces and separate them from other sub-standard pavement.
1) When to Perform Crack Sealing
A critical step to crack filling or sealing is determining whether your pavement conditions are appropriate for the service. For instance, you should never perform seal coating if water is present in cracks and joints since it could interfere with the adhesion of the material onto the asphalt surface.
Crack fill measures can be performed at any time during dry weather when there isn’t excess moisture or humidity on both sides of the paved surfaces. However, for best results it should be done after rainfall when the conditions are bright, sunny, and dry.
The seal coating and crack filling experts know the conditions of the place well and suggest when the time’s right for sealing the pavement. They also consider factors such as weather forecasts before starting crack-filling work!
2) Preparing the Surface for Sealing and Crack Filling
Working with asphalt sealcoating experts who know how to prepare the surface before applying the material ensures that everything goes as expected without any problems arising. Asphalt isn’t something you should try DIY; leave it up to professionals like Laurel Asphalt.
When ready for crack-filling work, the first thing we do is clear out what’s already there on your pavement. We remove old cracks, debris, and anything else sitting around – ensuring this leaves behind a new foundation where we will apply new coatings on top later on during the job.
3) Preparing the Right Material
Before the asphalt crack filling starts, we gather all the suitable materials required. For this process, our professionals utilize high-quality hot oil materials that are carefully calibrated and tested over years of experience in the field.
It’s essential to use suitable materials and the right device when applying liquids onto pavement cracks – else you will end up with uneven surfaces, which are not ideal for the surface. The material must be evenly spread out across your road surface so it can adequately dry after being heated by sun exposure throughout daytime hours.
If you want to enjoy professional seal coating and crack filling for your pavement, then Laurel Asphalt is the right choice for you. We offer first-rate commercial and residential paving services in Johnstown, ridding driveways and parking lots from the curse of excessive cracks and potholes. Get a free estimate from our team now!